Tracker Mounting Guide
This guide covers mounting Vive 3.0, Tundra, Ultimate Trackers and Mocopi trackers to the StretchSense Studio Gloves. It has links to where you can obtain compatible mounts and the necessary required materials to make each attachment, as well as the mounting process.
NOTE: We recommend using a third-party wrist strap to attach heavier trackers like the VIVE Ultimate Tracker. This helps to reduce the strain on the top electronics module while attached to the StretchSense Studio Gloves.
TIP: Calibrate the gloves with the tracker attached for best results.
| Mount Name | Tracker | Mount Image | Mount Image | Description | STL Download | Other Materials |
|---|---|---|---|---|---|---|
| Universal Mount for Studio Glove | Vive Tracker 3.0 | StretchSense Studio Glove universal mount (available to select when ordering Studio Glove from StretchSense website). Attach Vive Tracker with 1/4” screw. | N/A | 1/4” D-Ring Screw | ||
| Lenrui’s Vive Tracker 3.0 Mount for Studio Glove | VIVE Tracker 3.0 | Community-made mount by Lenrui from StretchSense Discord. Not recommended for SteamVR games with high activity - use the AMVR palm straps instead. | Vive3.0-Studio-Glove-Mount.stl | 1/4” D-Ring Screw | ||
| AMVR Palm Straps | VIVE Tracker 3.0 | Attach Ultimate Tracker using included Tundra baseplate with 1/4” screw. Make Vive 3.0 Tracker align horizontally along the strap with the LED facing your thumb. | N/A | https://www.amazon.com/Tracker-Adjustable-Tracking-Trackers-Wristband-NO/dp/B07S58VWP6AMVR Palm Straps | ||
| Universal Mount for Studio Glove | Tundra Tracker | StretchSense Studio Glove universal mount (available to select when ordering Studio Glove from StretchSense website). Attach Tundra Tracker using included Tundra baseplate with 1/4” screw. | N/A | 1/4” D-Ring Screw | ||
| Tundra Tracker | StretchSense Studio Glove universal mount (available to select when ordering Studio Glove from StretchSense website). Attach this mount to it by sliding it over the universal mount. Attach Tundra tracker by detaching the original base and screwing it to the 3D printed mount using the PH000 screws from the Tundra base. | StretchSenseTundraTrackerMount.stl | https://www.amazon.com/Wera-05345290001-Screwdriver-Electronic-Applications/dp/B00LCHYO8EPH000 ScrewdriverStretchSense Studio Glove Universal Mount | |||
| Lenrui’s Vertical Tundra Tracker Mount for Studio Glove | Tundra Tracker | Community-made mount by Lenrui from StretchSense Discord. Attach Tundra tracker by detaching the original base and screwing it to the 3D printed mount using the PH000 screws from the Tundra base. | Studio-Glove-TundraTracker-Mount-Plate-V2-vert.stl Print vertically with supports to improve stability | https://www.amazon.com/Wera-05345290001-Screwdriver-Electronic-Applications/dp/B00LCHYO8EPH000 Screwdriver | ||
| SlimeVR Tracker Baseplate | SlimeVR | Community-made mount by Snax from StretchSense Discord.1. Attach SlimeVR trackers by opening the original slime case.2. Replace the back panel with the 3D printed part.3. Clip into StretchSense Universal Mount holes. | [SlimeVR Backplate for StretchSense Mounting Clip | SlimeVR_Mount_1](https://cad.onshape.com/documents/fe62622c0f8b18c3c7d21b33/v/34846ad5fb0a49f3bf531cdd/e/6cb43323b7a449ff479f0ba5) | ||
| Ultimate Tracker Low-Profile Mount for Studio Glove | Ultimate Tracker | Experimental Ultimate Tracker mount by StretchSense. Print in PLA with supports vertically on diagonal angle to improve structure. Supports must be removed cleanly using cutting pliers. Attach hair ties around thumb to stabilize while attached to glove and to reduce strain on the mount and Studio Glove electronics module. | StretchSense VIVE Ultimate Tracker Mount-external-hooks.stl | Cutting pliersRubber bands or hair ties | ||
| AMVR Palm Straps | Ultimate Tracker | Attach Ultimate Tracker using included Tundra baseplate with 1/4” screw. Make Ultimate Tracker align horizontally along the strap with the LED facing your chest when your arms are outstretched. | N/A | https://www.amazon.com/Tracker-Adjustable-Tracking-Trackers-Wristband-NO/dp/B07S58VWP6AMVR Palm Straps | ||
| Mocopi Mount | mocopi left / right trackers | Using the T6 screwdriver, unscrew the T6 screws from the left and right mocopi wrist straps to release the magnetic base of the mount. Clip the 3D printed mount in between the two sides of the magnetic base and screw the T6 screws back in. Don’t over tighten and be careful not to strip the screws.You must wear the other trackers in the correct position and calibrate using SlimeVR server connected to the mocopi app. | MOCOPI MOUNT design file.stl You may need to file and cleanup the 3D print to get the magnetic base to fit correctly. | https://www.amazon.com/Wera-05118181001-Kraftform-Electronics-Screwdriver/dp/B003ES5M4O?ref_=ast_sto_dp&th=1T5 Screwdriver |
| Changelog | Version | Publish Date (YYYY/MM/DD) |
|---|---|---|
| Add SlimeVR backplate 3D print by Snax. | v1.1.0 | 2025/01/30 |
| Initial version. | v1.0.0 | 2024/11/20 |
Related Articles
VIVE Ultimate Tracker Meta Quest PCVR + SteamVR Guide
Objective This knowledgebase article will show you how to setup your VIVE Ultimate Trackers to track the position and rotation of StretchSense Studio gloves in space while using SteamVR and a headset with inside-out-tracking like Meta Quest. It will ...OpenGloves Configuration Guide
TIP: This guide assumes you have followed the StretchSense SteamVR App Setup Guide . NOTE: Changes are incoming in future versions of the StretchSense App for SteamVR which may break future compatibility with OpenGloves. We are planning to add the ...Meta Quest OpenVR Space Calibrator Guide
Objective This knowledgebase article will show you how to setup your Vive or Tundra Trackers to combine Meta Quest Headsets with SteamVR tracking spaces in order to use trackers with StretchSense gloves in space. Required Materials Software The below ...StretchSense SteamVR App Setup Guide (Open Beta)
https://vimeo.com/1002592033 View the SteamVR open early access roadmap here Required Materials Software The below software is required for this guide, except those marked as optional: TIP: Installers for the StretchSense App for SteamVR can be ...Unity & Vive Trackers - Guide for Set Up with Hand Engine
Unity & Vive Trackers - Guide for Set Up with Hand Engine # Required Materials Software The below software is required for this guide, except those marked as optional: Description Version Hand Engine 3.0.12-PRO, 3.0.11-LITE Unity Editor 2022.3* Unity ...